Professional Dual Channel Bluetooth Power Amplifier High Power OEM 2 Zones Stereo Audio Amp Receiver
Features of the Dual Bluetooth audio amplifier
* Bluetooth 5.0 Amplifier with aptX technology for wireless Hi-Fi listening
* Dual stereo RCA line level inputs switch sources automatically
* Convenient signal sensing power on and trigger modes save power when not in use
* A/B speaker selector simplifies connectivity
* 5-way binding posts on both sets of L/R speaker outputs
* This Bluetooth HIFI amplifier with Front panel balance and volume controls
* Rear panel treble and bass controls
* Signal sensing power on and trigger mode
* Audio siganl pass to another amplifier via RCA
* The Bluetooth power amplifier with Bridge mode
* Short circuit and thermal protection
China audio factry, suppo OEM / ODM
Specification of the Stereo Bluetooth HIFI Amplifier:
| Product name | XMP-100BT Bluetooth stereo HIFI amplifier |
| Output power | 2X80W per channel at 4ohm 2x60W per channel at 8ohm 1x160W at 1KHz 8ohm, bridge mode |
| Channel separation | 44 dB |
| THD | < 0.05% (@ 1kHz) |
| S/N Ratio | > 88dB |
| output noise | < 1mv |
| Input sensitivity | 700 mv |
| Frequency response | 20-20K Hz |
| Bass/Treble control | +/- 12dB at 100 Hz and 10K Hz |
| Class type | Home use Class D amplifier |
| Product working voltage | AC 110-240V/50Hz |
| Number of channels | 4 channels, speaker A/B selectable |
| Input methods | Bluetooth, RCA |
| Finish color | Black |
| Panel material | Aluminum |
| Net weight | 2.2 KGs |
Mode Select Switch STEREO MODE
If you connect one or two pairs of speakers to the amplifier, pleace the switch in the "STEREO" position.
Note: For playing 2 pairs of speakers (A plus B), make sure each speaker has an impedance of 8ohm or greater.
BRIDGE MODE
When set to "Bridge" mode, the amplifier is a signal channel mono amplifier.
For bridge mode, playing right and left together as mono output, plug RCA cables in to Right and Left at main input.
Pictures of the Stereo Audio Receiver
When set to "Bridge" mode, the amplifier is a signal channel mono amplifier.
For bridge mode, playing right and left together as mono output, plug RCA cables in to Right and Left at main input.
Product Tags:
|
|
Professional Dual Channel Bluetooth Power Amplifier High Power OEM 2 Zones Stereo Audio Amp Receiver Images
|
